
Slotted vs Phillips Machine Screws: Which Drive to Choose
Slotted or Phillips? Compare drive types on cam-out and assembly speed, pick the right head style, and see our SS 304 machine screw size range.
Worldwide shipping · SS 304 / 316 / 202
Home / Blog

Slotted or Phillips? Compare drive types on cam-out and assembly speed, pick the right head style, and see our SS 304 machine screw size range.

How to cut a 1000 mm stainless stud to length, restore the thread after cutting, avoid galling and choose the right nuts and washers.

When a 110 to 200 mm bolt is the right choice, how to work out grip length and thread length, how to avoid bending, and which washers and nuts to pair.

Compare button head, Allen CSK and Allen cap screws on head profile, flush fit and strength, and see which stainless sizes and grades are available.

Pilot hole or no pilot hole? A buyer’s guide to self-drilling and self-tapping stainless screws, covering sheet thickness, head styles and available sizes.

A practical grub screw (set screw) guide: what they do, how to choose diameter and length for a shaft or collar, and which material to specify, from M3 to M16.

How a thin lock nut (jam nut) locks a joint when used with a full nut, the correct tightening order, and the situations where thin nuts are the right choice.

Should you use a flange nut or a hex nut with a separate washer? A practical comparison covering load spreading, vibration and when each is the better fit.

A buyer’s guide to stainless steel dome (cap) nuts: what they protect, where they are used and how to pick the size and grade, from M3 to M24.

How to choose between light duty and heavy duty stainless steel wing nuts, with size ranges, hand-tightening limits and where each type is used.
Send your requirement and we reply with a quotation. You can also attach a drawing.