Worldwide shipping · SS 304 / 316 / 202

MATERIAL GRADE

SS 316 Stainless Steel Fasteners (A4)

SS 316, known as A4 in the ISO fastener system and 1.4401 in the European system, adds molybdenum to resist chlorides. We manufacture SS 316 nuts, bolts, washers, screws and studs in metric and inch sizes and export them from India.

What SS 316 is

SS 316 is an austenitic stainless steel with about 16 to 18% chromium, 10 to 14% nickel and 2 to 3% molybdenum. The molybdenum improves resistance to pitting and crevice corrosion in chloride environments such as seawater and salt spray.

Where it is the right choice

Property classes

SS 316 fasteners are normally supplied in classes A4-50 (soft), A4-70 and A4-80 under ISO 3506. A4-70 is common for bolts and screws, and A4-80 where higher strength is required. State the class on your enquiry.

Limits to know

SS 316 costs more than SS 304 because of its nickel and molybdenum content, so use it where the environment needs it. Even 316 can be attacked in hot, stagnant or heavily chlorinated conditions, and very severe duties need a specialist assessment. Read our guide to SS 316 for marine and offshore use.

Standards

We supply to DIN, ISO and BS references and, on request, ASTM references. Send the standard and size list on your enquiry and we will confirm availability and available documents before you order.

Frequently asked questions

A4 is the ISO 3506 name for the 316 family of stainless fastener steels. The class that follows, such as A4-80, shows the strength.

For better resistance to chlorides. It is the usual choice near the sea, in chemical plants and where salt is used. For general dry use, SS 304 is usually enough.

Yes. Send the drawing or sample with the grade and quantity and we will confirm what we can make.

Request a quote

Send your grade, size, quantity and standard. We reply with a detailed quotation. You can also attach a drawing.

Accepted file types: pdf, jpg, jpeg, png, dwg, dxf, xls, xlsx, doc, docx, Max. file size: 10 MB.