Worldwide shipping · SS 304 / 316 / 202

GRADE SELECTION

Stainless Steel Grade Selection Support: SS 304, 316, 202

We help you choose between SS 304, SS 316 and SS 202, and the A2 and A4 equivalents, based on environment and application. Tell us where the fasteners will be used and we suggest a suitable grade.

What is included

Who this service is for

How it works

You describe the application: indoor or outdoor, coastal, chemical, food or general use. We recommend a grade based on that and on the strength class you need. SS 304 (A2) suits general use, SS 316 (A4) resists chlorides better because it contains molybdenum, and SS 202 suits mild environments where cost matters. Sending a drawing, sample or clear photo with your enquiry helps us match the part faster and avoids mistakes.

Typical use cases

What we need from you

Send the environment, any chemicals or salt exposure, temperature, load and the standard named on your drawing. If you have an existing part, send its markings, for example A2-70. The more detail you give, the clearer our suggestion will be, and the faster we can confirm what we can supply for your order. Sending a drawing, sample or clear photo with your enquiry helps us match the part faster and avoids mistakes.

What you get back

You get a recommendation of grade and property class, with a short reason, and confirmation of what we can supply. Final suitability depends on your application, so check critical applications with your engineer. We do not promise compliance we cannot verify, and we confirm documents we can provide before an order. Sending a drawing, sample or clear photo with your enquiry helps us match the part faster and avoids mistakes.

Why source from Ayr SS Nut Bolt

Frequently asked questions: Stainless Steel Grade Selection Support: SS 304, 316, 202

Choose SS 304 (A2) for general use and SS 316 (A4) for marine, coastal and chemical environments, because it resists chlorides better. Tell us your application and we suggest one, and confirm what we can supply before you place an order.

A2 and A4 are stainless groups in ISO 3506. A2 is similar to SS 304 and A4 is similar to SS 316. They are followed by a property class such as 70 or 80, which shows the strength level, as in A2-70 or A4-80.

SS 202 suits mild environments, but it has lower corrosion resistance than SS 304 or SS 316. For outdoor, coastal or wet conditions, SS 304 or SS 316 is the safer choice. Tell us the conditions and we advise on the right grade.

Mixing grades is possible but the weaker grade sets the corrosion resistance of the joint. Use the same grade for bolt, nut and washer where possible. Tell us what you already have installed and we suggest a matching grade for the new parts.

Class 70 is common for general use and class 80 is higher strength. The class should match your drawing or load requirement. Tell us the requirement and we confirm what we can supply, and for critical joints check with your own engineer.

Email your application, environment and any standard to ayrssnutbolt@gmail.com or call +91 89196 74214. We reply with a suggested grade and what we can supply, along with the documents we can provide before an order is placed. Send your specification and we confirm what we can supply before you order.

Get help choosing a grade

Send your requirement and we confirm what we can supply before you order. Call +91 89196 74214 or email ayrssnutbolt@gmail.com.

Accepted file types: pdf, jpg, jpeg, png, dwg, dxf, xls, xlsx, doc, docx, Max. file size: 10 MB.