Worldwide shipping · SS 304 / 316 / 202
DIN 125 is the standard for plain flat washers, and the ISO equivalents are ISO 7089 and ISO 7090. We supply plain washers in stainless steel in SS 304 and SS 316. Send size and grade for a quote.
DIN 125 covers flat round washers used under bolt heads and nuts to spread the load over a larger area and protect the surface. Washers are named by the bolt size they fit, so an M8 washer has an inner diameter of about 8.4 mm, an outer diameter of 16 mm and a thickness of 1.6 mm. Form A has no chamfer, and form B has a chamfered inner edge.
ISO 7089 is the equivalent of DIN 125 form A, and ISO 7090 is the chamfered version, similar to form B. DIN 125 was replaced by the ISO versions, but the DIN number remains common. Larger outside diameter washers are covered by different standards such as DIN 9021, so state it if you need one. DIN 127 is a spring washer, not a flat washer.
Write the standard, size, grade and quantity, for example: DIN 125 A M10 A2 flat washer, 10,000 pieces. State the form if you need chamfered washers. Add packing needs and destination country. We confirm availability, the standard and which documents we can provide before you place an order. Sending a drawing, sample or clear photo with your enquiry helps us match the part faster and avoids mistakes.
A DIN 125 washer is a plain flat round washer used under bolt heads and nuts to spread load and protect surfaces. The ISO equivalents are ISO 7089 and ISO 7090. We supply it in stainless steel, and confirm availability before you order.
ISO 7089 is the equivalent of DIN 125 form A, and ISO 7090 is the chamfered version, similar to form B. DIN 125 was replaced by the ISO standards, but the DIN number is still widely used. Tell us the form you need and we confirm.
An M8 DIN 125 washer has an inner diameter of about 8.4 mm, an outer diameter of 16 mm and a thickness of 1.6 mm. Washers are named by the bolt size they fit. Send the size you need and we confirm what we can supply.
DIN 9021 washers have a larger outside diameter than DIN 125, which spreads load over a wider area and helps with oversized holes. State the standard you need on your order so we can confirm what we can supply for your requirement.
Use the same stainless group as your bolt and nut. SS 304 (A2) suits general use and SS 316 (A4) suits marine and chemical exposure. Tell us the bolt grade and we match the washer grade, then confirm availability before you order.
Send the size, form, grade, quantity and destination to ayrssnutbolt@gmail.com or call +91 89196 74214. We confirm availability, the standard and the documents we can provide before an order, and pack the goods for export by sea or air. Send your specification and we confirm what we can supply before you order.
Send us the standard, grade, size and quantity. We confirm availability, the standard and the documents we can provide before you order.