Worldwide shipping · SS 304 / 316 / 202

DIN 7991

DIN 7991 Stainless Steel Countersunk Allen Screws

DIN 7991 is the standard for countersunk head screws with a hex socket, and the ISO equivalent is ISO 10642. We supply them in stainless steel in SS 304 and SS 316. Send size, length and grade for a quote.

Sizes and variants we supply

Grades and property classes

What DIN 7991 covers

DIN 7991 covers screws with a flat countersunk head, a 90 degree head angle and an internal hex socket. The head sits flush with the surface when fitted into a matching countersunk hole, giving a smooth finish. The screw is driven with an Allen key, so you need a countersink cut to the correct angle and depth in the mating part.

Typical applications

Equivalent standards and differences

ISO 10642 is the international equivalent of DIN 7991, and the DIN standard has been replaced by the ISO version, though the DIN number remains common. Dimensions are very close. Slotted and Phillips countersunk screws are different standards, so state the drive type. DIN 912 is the cylindrical head Allen screw, covered on its own page. Sending a drawing, sample or clear photo with your enquiry helps us match the part faster and avoids mistakes.

How to specify DIN 7991 on a purchase order

Write the standard, size, length, grade and quantity, for example: DIN 7991 M6 x 25 A2-70 countersunk screw, 2,000 pieces. For countersunk screws, length is measured including the head. Add finish, packing needs and destination country. We confirm availability, the standard and documents we can provide before you order. Sending a drawing, sample or clear photo with your enquiry helps us match the part faster and avoids mistakes.

Why source from Ayr SS Nut Bolt

Frequently asked questions: DIN 7991 Stainless Steel Countersunk Allen Screws

A DIN 7991 screw is a countersunk head screw with a hex socket, driven by an Allen key. Its ISO equivalent is ISO 10642. We supply it in stainless steel grades SS 304 and SS 316, and confirm availability and documents before you order.

The ISO equivalent of DIN 7991 is ISO 10642. DIN 7991 was replaced by the ISO version, and dimensions are very close, though the DIN number is still widely used. Tell us which standard your drawing names and we confirm what we can supply.

On a countersunk screw such as DIN 7991, length is measured from the top of the head to the tip, because the head sits flush. This differs from hex bolts, where length is measured under the head. State the length convention if in doubt.

DIN 7991 screws have a 90 degree countersunk head, so the mating hole needs a matching 90 degree countersink. Check your drawing for the correct depth and diameter, and send us the details if you want advice on the screw size.

SS 304 (A2) suits general use and SS 316 (A4) suits marine, coastal and chemical exposure. Tell us the application and the strength class you need, and we suggest a grade and confirm what we can supply before you place an order.

Send the size, length, grade, quantity and destination to ayrssnutbolt@gmail.com or call +91 89196 74214. We confirm availability, the standard and the documents we can provide before an order, and pack the goods for export by sea or air. Send your specification and we confirm what we can supply before you order.

Request DIN 7991 screws

Send us the standard, grade, size and quantity. We confirm availability, the standard and the documents we can provide before you order.

Accepted file types: pdf, jpg, jpeg, png, dwg, dxf, xls, xlsx, doc, docx, Max. file size: 10 MB.