Worldwide shipping · SS 304 / 316 / 202
DIN 912 is the standard for hex socket cap screws with a cylindrical head, and the ISO equivalent is ISO 4762. We supply Allen cap screws in stainless steel in SS 304 and SS 316. Send size, length and grade for a quote.
DIN 912 covers screws with a cylindrical head and an internal hex socket driven by an Allen key. Head diameter is about 1.5 times the thread size and head height equals the thread size. The socket key sizes are standard, such as 5 mm for M6 and 6 mm for M8. The compact head lets the screw sit in a counterbore, giving a neat, low profile finish.
ISO 4762 is the international equivalent of DIN 912, and DIN 912 has been replaced by the ISO version, though the DIN number remains common. Dimensions are very close. DIN 7991 is the countersunk Allen screw, with ISO 10642 as its equivalent, covered on its own page. Inch series socket cap screws follow ASME dimensions. Sending a drawing, sample or clear photo with your enquiry helps us match the part faster and avoids mistakes.
Write the standard, size, length, grade and quantity, for example: DIN 912 M8 x 30 A2-70 socket cap screw, 3,000 pieces. Add finish, packing needs and destination country. If your drawing names ISO 4762, mention it. We confirm availability, the standard and which documents we can provide before you order. Sending a drawing, sample or clear photo with your enquiry helps us match the part faster and avoids mistakes.
A DIN 912 screw is a socket head cap screw with a cylindrical head and hex socket, driven by an Allen key. The ISO equivalent is ISO 4762. We supply it in stainless steel grades SS 304 and SS 316, and confirm availability before you order.
The ISO equivalent of DIN 912 is ISO 4762. DIN 912 was replaced by the ISO standard, and the dimensions are very close, though the DIN number is still widely used. Tell us which standard your drawing names and we confirm what we can supply.
An M6 DIN 912 screw uses a 5 mm hex key, and an M8 uses a 6 mm key. Always use a key that fits tightly, because a worn or loose key can round out the socket in stainless steel, which is softer than hardened alloy steel screws.
DIN 912 has a cylindrical head that sits above the surface or in a counterbore, while DIN 7991 has a countersunk head that sits flush with the surface. Choose according to the joint design, and tell us which you need when you order.
SS 304 (A2) suits general use and SS 316 (A4) suits marine, coastal and chemical exposure. Tell us the application and the strength class you need, and we suggest a grade and confirm what we can supply before you place an order.
Send the size, length, grade, quantity and destination to ayrssnutbolt@gmail.com or call +91 89196 74214. We confirm availability, the standard and the documents we can provide before an order, and pack the goods for export by sea or air. Send your specification and we confirm what we can supply before you order.
Send us the standard, grade, size and quantity. We confirm availability, the standard and the documents we can provide before you order.