Worldwide shipping · SS 304 / 316 / 202

A flange nut is a hex nut with a wide, integral washer face on one side. The flange spreads the clamping load over a larger area of the joint and, on many joints, removes the need for a separate washer. The bearing face also helps the nut resist loosening on a bolted joint.
Our stainless steel flange nuts are made in SS 304, so they resist rust and staining in damp, washed-down and outdoor settings. As manufacturers and super-stockists in Ahmedabad, we supply them in metric sizes from M4 to M12.
SS 304
Metric
M4 to M12
Hex nut with integral flange
Confirmed on enquiry
Confirmed on enquiry
Flange nuts are commonly made to DIN 6923. Tell us the size and the standard you need and we will confirm what we can supply. For plain hex nuts in M2 to M36 and BSW 1/8 inch to 3/4 inch, see our hex nuts page.
Read our guide: Flange nuts vs hex nuts.
We supply SS 304 flange nuts in metric sizes from M4 to M12. Sizes outside this range are confirmed on enquiry.
The flange acts as a built-in washer face, so a separate washer is often not needed. If the mating surface is soft, slotted or oversized, check with your designer whether an additional washer is still required.
Our flange nuts are listed in SS 304. If your application involves salt, chlorides or chemicals, ask us whether another grade can be arranged for your size.
Frames and housings where the load is spread over a wider bearing face.
Assemblies where the bearing face helps the nut stay tight.
Rust-resistant fixings for washed-down machinery.
Brackets, panels and supports exposed to weather.


