Worldwide shipping · SS 304 / 316 / 202

Phillips machine screws have a cross-shaped recess in the head. A Phillips driver centres itself in the recess, which makes the screw quicker to fit and easier to drive straight than a slotted type. They go into tapped holes or take a nut, and suit repeat assembly work on panels, housings and equipment.
Our stainless steel Phillips machine screws are made in SS 304, so they resist rust and staining where plain steel screws would corrode. As manufacturers and super-stockists in Ahmedabad, we supply pan head and countersunk (CSK) Phillips types in metric and BSW (inch) series.
SS 304
M2 to M10
1/8 inch to 3/8 inch
M2 to M12
1/8 inch to 1/2 inch
From 4 mm to 100 mm
Common references include DIN 7985 (pan head) and DIN 965 (countersunk, cross recess). Which standard applies to your size is confirmed on enquiry; tell us what your drawing calls for.
Read our guide: Slotted vs Phillips machine screws.
In SS 304, pan Phillips screws are listed from M2 to M10 and 1/8 inch to 3/8 inch BSW. CSK Phillips screws are listed from M2 to M12 and 1/8 inch to 1/2 inch BSW. Lengths run from 4 mm to 100 mm. Other combinations are confirmed on enquiry.
They are listed in SS 304. If you need another grade for a corrosive or marine setting, ask us and we will confirm what can be arranged for your size.
A pan head sits proud of the surface with a rounded top. A countersunk (CSK) head sits flush in a countersunk hole, giving a flat finish. Choose by how the part must look and sit.
Covers, doors and control panels fitted with a standard driver.
Repeat assembly in rust-resistant stainless steel.
Washed-down machinery that needs rust-resistant fixings.
CSK heads where a flat, flush surface is needed.


