Worldwide shipping · SS 304 / 316 / 202

Self-tapping screws cut or form their own thread in the material as they are driven in, so the hole needs no tapping beforehand. Self-drilling screws go a step further: a drill-point tip makes the pilot hole and the screw then forms its thread, all in one operation. Both save time on sheet metal, thin sections and light fabrication.
Our stainless steel versions resist rust and staining, which keeps fixings reliable outdoors, in kitchens and in damp areas. We supply self-tapping screws in SS 304 and SS 316, and self-drilling screws in SS 304.
SS 304 and SS 316
SS 304 (A2)
2.9 mm (#4) to 6.3 mm (#14)
3.5 mm (#6) to 6.3 mm (#14)
3.5 mm (#6) to 5.5 mm (#12)
From 6.5 mm up to 100 mm
Standards and drawings are confirmed on enquiry. Self-tapping screws are available with CSK slotted, CSK Phillips, pan slotted and pan Phillips heads. Self-drilling screws are available with CSK Phillips, pan slotted and pan Phillips heads.
Read our guide: Self-drilling vs self-tapping screws.
A self-tapping screw needs a pilot hole and then forms its own thread. A self-drilling screw has a drill-point tip, so it makes the hole itself and then forms the thread. Self-drilling screws suit thin sheet metal fixing without a separate drilling step.
Self-tapping screws come in SS 304 and SS 316. Self-drilling screws come in SS 304 (A2). Heads are countersunk (CSK) or pan, with slotted or Phillips drive on self-tapping screws, and CSK Phillips or pan slotted and Phillips on self-drilling screws.
SS 304 suits general indoor and outdoor use. Choose SS 316 where chlorides, salt spray or chemicals are present, such as coastal or marine sites.
Joining thin sheet, panels and ducting without pre-tapping.
Fixing light stainless and metal sections outdoors.
Rust-resistant fixings for cabinets, covers and fittings.
Light assemblies, brackets and cover plates.


