Worldwide shipping · SS 304 / 316 / 202

A lock nut, also called a thin nut or jam nut, is a low-profile hex nut. It is tightened against a standard nut on the same bolt or stud, and the two nuts working against each other lock the joint and resist loosening. Thin nuts are also used where there is too little space for a full-height nut.
Our stainless steel lock nuts are made in SS 304 and SS 316, so they resist rust and staining in damp, washed-down and corrosive settings. As manufacturers and super-stockists in Ahmedabad, we supply them in a wide metric range.
SS 304 and SS 316
Metric
M5 to M36
Thin hex nut (jam nut)
Confirmed on enquiry
Confirmed on enquiry
Standards and drawings are confirmed on enquiry. Tell us the size, grade and thread you need and we will confirm what we can supply. For plain hex nuts in M2 to M36 and BSW 1/8 inch to 3/4 inch, see our hex nuts page.
Read our guide: Thin lock (jam) nuts explained.
Fit the standard nut first and tighten it, then thread the thin nut on and tighten it firmly against the standard nut. The two nuts working against each other lock the joint and resist loosening.
We supply thin lock nuts in SS 304 and SS 316, in metric sizes from M5 to M36. SS 316 sizes are confirmed on enquiry, so mention the sizes you need in your message.
SS 304 suits general indoor and outdoor use and food equipment. Choose SS 316 when chlorides, salt spray or acids are present, for example marine, coastal and chemical installations.
Jam-nut pairing on bolts, studs and threaded rod.
Joints with too little room for a full-height nut.
Adjusters, linkages and threaded fittings.
SS 316 lock nuts where salt or chemicals are present.


