Worldwide shipping · SS 304 / 316 / 202

Stainless Steel Fasteners for Rajkot Pump and Machine-Tool Makers

Pipe flange joint with stainless steel stud bolts and nuts

Short answer: Rajkot manufacturers can usually cover most assemblies with standard DIN and ISO stainless fasteners, and order special sizes only where a drawing demands them. Planning both together in one enquiry and settling a repeat schedule saves time and avoids line stoppages. Ayr SS supplies both standard and made-to-order parts and confirms price and lead time in each quotation.

What do Rajkot engineering units typically buy?

Rajkot and the Saurashtra belt are known for pumps, diesel engines, machine tools, castings and general engineering work. These units assemble large numbers of similar products, so their fastener demand is steady rather than occasional. Typical needs include stainless bolts and studs for pump casings and covers, nuts and washers for engine assembly, socket screws for machine guards and tooling, and studs for flanged joints.

Which sizes are standard, and which are special?

Standard parts follow published dimensions, so they are easier to specify and compare. Special parts are made to your drawing or a sample. This table shows how to think about it.

TypeExamplesHow to enquire
StandardHex bolts DIN 933, hex nuts DIN 934, socket screws DIN 912, washers DIN 125Give standard, grade, size and quantity
Standard, uncommon sizeLong bolts, large diameters beyond the listed rangeGive full dimensions and grade
SpecialStepped studs, non-standard threads, special headsSend drawing or sample
Inch seriesImported engine or machine sparesState thread form and pitch

See the standard range on our products page, including SS hex bolts and SS hex nuts. The list of codes we work to is on our standards page.

Which grade is right for pumps and engines?

For pump parts that touch water, mild chemicals or washdown, SS 304 is a common choice and SS 316 suits chlorides, brackish water and more aggressive fluids. SS 202 is cheaper but less corrosion resistant, so it should be limited to dry, low-demand fittings. Also check strength. Austenitic stainless is not as strong as hardened alloy steel, so for high-load engine joints the property class under ISO 3506 and the design load should be confirmed by your engineer. Our SS 304 page gives the basics.

How do I plan bulk repeat orders?

Many Rajkot units order the same fasteners every month. A routine makes this smoother:

  1. Freeze the specification. Write down grade, standard, size, thread and finish once and reuse it.
  2. Combine standard and special lines in one enquiry so we can plan both together.
  3. Share a forecast for the quarter, even a rough one.
  4. Agree on documents such as a material test certificate, if your customers ask for them.
  5. Review each batch and tell us promptly about any issue.

Our bulk and OEM supply service is built for this kind of ongoing work, and the Rajkot page explains how we serve the area.

What should I check on the first batch?

Measure thread fit with your go and no-go gauges, check head and length dimensions against the drawing, and confirm the grade by test certificate or by the method you normally use. Read about our own checks on the quality page, and tell us what extra checks you want added.

How can I reduce downtime caused by fastener shortages?

Small parts stop big machines. The simplest protection is to list the fasteners that would halt your line if they ran out, and plan those first. Give us the list with the standard, grade and size of each, and a realistic estimate of monthly use. We can then quote the repeat lines together and plan around your usage pattern.

Keep a note of which items are standard and which are special. Standard items are usually easier to replace if a release is late, while special items need drawing approval and tooling. If you tell us which items are critical to your line, we can flag them in planning. We do not promise delivery times in advance, because they depend on the item, but we will state the lead time in each quotation so you can set your own reorder point sensibly.

Frequently asked questions

Can you supply both standard and special fasteners together?

Yes. Put them in one enquiry and we will quote them together, with the lead time for each line stated in the quotation.

What is the largest bolt you make?

Our listed bolts run to M24 and our studs to M36 in 1000 mm lengths, with larger sizes and other lengths made to order.

Do you export as well as supply within India?

Yes. We ship worldwide with export packing and documents including invoice, packing list and certificate of origin.

Ready to move ahead? Send your drawing, sample or size list and request a quote. You can also call +91 89196 74214 or write to ayrssnutbolt@gmail.com, and our team will reply with price and lead time in the quotation.

Need stainless steel fasteners like these?

Send your grade, size, quantity and standard. We reply with a quotation and confirm availability, standards and documents before you order.

Share this article

Keep Reading

Related Articles