Worldwide shipping · SS 304 / 316 / 202

How to Import Stainless Steel Fasteners from India to the USA

Container ship at an international port for worldwide fastener export

Short answer: Yes, US buyers can import stainless steel fasteners from India, and the main job is getting the specification right before you order. Confirm whether your drawing calls for inch-series UNC/UNF threads or metric, and which standard (for example ASTM F593/F594 or ISO 3506) it references, then agree documents, packing and Incoterms in writing.

Do I need inch-series or metric fasteners?

US equipment is a mix. Older machinery, structural and general industrial work often uses inch sizes with UNC (coarse) or UNF (fine) threads, while newer imported equipment is frequently metric. Mixing the two causes the most expensive mistakes: a metric bolt can start into an inch nut and then jam or strip. We supply both metric and inch-series nuts, bolts, washers, screws and studs, so state clearly in your enquiry which series you want.

Send the thread designation exactly as it appears on your drawing, for example the diameter, threads per inch, length, head type and thread class. If you only have a sample, we can work from that, but a drawing is always safer.

Which standards should I ask for: ASTM F593/F594 or ISO 3506?

In the US, stainless bolts, cap screws and studs are commonly specified to ASTM F593, and stainless nuts to ASTM F594. Metric work, and many imported machines, reference ISO 3506 property classes such as A2-70 and A4-80. Both are widely used, but they are not interchangeable paperwork. Buyers should confirm which specification their drawings or purchase order actually call for and tell us at the quotation stage, rather than assuming.

On the dimensional side we work to DIN, ISO and BS standards, including DIN 931/933 hex bolts, DIN 934 nuts, DIN 912 socket head cap screws, DIN 7991 countersunk screws and DIN 125 washers. You can see how these fit together on our standards page.

Which grade suits my application?

For general indoor and light outdoor use, SS 304 fasteners are the usual choice. Where chlorides, salt spray, chemicals or marine exposure are involved, SS 316 fasteners perform better. We also supply SS 202 for less demanding, cost-sensitive uses. If you are unsure, tell us the environment and we can discuss the options.

What documents will I receive?

A standard shipment comes with a commercial invoice and packing list. A certificate of origin can be provided when required, and a material test certificate is available on request, so ask for it when you place the order if your quality system needs traceability. Fasteners fall under HS heading 7318, but duties, entry requirements and any other US import rules are for you or your customs broker to confirm; we do not quote duty rates.

Our export process page explains the usual flow from enquiry to dispatch.

How are fasteners packed for sea freight to the USA?

Stainless fasteners are heavy, so packing matters. We pack in cartons, then palletise or crate them for sea freight, with each carton marked with size, grade and quantity so your warehouse can receive and put away without opening every box. Mixed-size orders are labelled clearly so lines do not get confused. More detail is on our export packing and shipping page.

We can quote EXW, FOB, CFR, CIF or DDP, and ship by sea, air or courier depending on order size and urgency. For a first order, many buyers choose a smaller trial quantity by courier or air to check quality before committing to a container.

Where does the USA fit in your supply plan?

If you are comparing sourcing routes, see our overview of supplying stainless steel fasteners to the USA, and our quality page for how we check material and dimensions before dispatch.

What should I put in my first enquiry?

A clear enquiry saves several rounds of emails. For each line, give the item name, standard or drawing reference, nominal size and thread (including threads per inch for inch-series parts), length, grade, finish requirement and quantity. Add the destination port or delivery address, your preferred Incoterm, and whether you need a material test certificate.

It also helps to say what the fasteners are for. A bolt that holds a guard panel and a bolt that sits in a wet outdoor structure may justify different grades, and we would rather ask than guess. If you are replacing an existing part, post or courier a sample and we can measure it against your drawing before quoting. Mixed inch and metric lines on one order are fine, provided each line is labelled clearly.

Finally, keep your own incoming inspection in mind. Agree up front how you will check size, thread fit and marking on arrival, so any question can be settled quickly with reference to the same specification.

Frequently asked questions

Can you make fasteners to my drawing?

Yes. We make to order from a drawing or a sample. Send dimensions, thread series, grade and quantity, and tell us which standard the part must meet.

Can I order a small trial quantity first?

Yes, small trial orders are possible. This is a sensible way to check fit, finish and packing before a larger shipment.

Will the fasteners be marked with grade?

Marking depends on the product and standard. State your marking requirement, such as A2-70 or A4-80 head markings, in the enquiry so it can be confirmed before manufacture.

Ready to start? Share your drawing, quantity and destination port and send your requirement for a quotation, or call +91 89196 74214 or email ayrssnutbolt@gmail.com.

Need stainless steel fasteners like these?

Send your grade, size, quantity and standard. We reply with a quotation and confirm availability, standards and documents before you order.

Share this article

Keep Reading

Related Articles