Worldwide shipping · SS 304 / 316 / 202

SS Bolts and Nuts Supplier for Delhi NCR Construction Projects

Modern building facade with stainless steel railings

Short answer: For outdoor and facade fixings in Delhi NCR, SS 304 is the usual starting grade, and SS 316 is worth the extra cost where the fixing is exposed to heavy pollution, chemical cleaning or any chloride source. Indoor and dry MEP work can often use SS 304. Tell us the exposure and load, and we will recommend the grade and standard.

Which grade suits outdoor use in Delhi NCR?

Delhi NCR has hot summers, a monsoon, cold winters and heavy dust and air pollution. It is inland, so chloride from the sea is not the main concern, but road salt, cleaning chemicals, swimming pools and industrial fumes can be. Use the table as a starting point, not a substitute for your engineer’s specification.

ApplicationGrade to considerReason
Facade and cladding bracketsSS 304Good general corrosion resistance
Rooftop HVAC supportsSS 304, or SS 316 if pollutedConstant weather exposure
Swimming pool, spa, plant rooms with chemicalsSS 316Chlorides and chemicals attack 304
Indoor ducting and pipe supportsSS 304Dry conditions
Temporary or non-critical fittingsSS 202Lower corrosion demand only

Details on each grade are on our SS 304 and SS 316 pages. SS 202 has lower nickel content and lower corrosion resistance, so we do not suggest it for exposed outdoor work.

What fasteners do HVAC and MEP contractors need?

MEP packages typically mix many small items: hex bolts and nuts for duct and pipe supports, threaded rod and studs for hangers, washers for load spreading, and socket screws for equipment. Order them as one schedule so grade, standard and finish stay consistent across the job.

  • Hangers and supports: threaded studs or rod, hex nuts and washers.
  • Equipment mounting: hex bolts to DIN 933 or DIN 931 with nylon-insert or plain nuts.
  • Panels and covers: socket head and countersunk screws such as DIN 912 and DIN 7991.

See SS hex bolts and SS hex nuts for the standard range.

How do I specify structural and facade fixings?

Structural fixings carry load, so strength matters as much as corrosion resistance. Stainless fasteners are classed under ISO 3506, which uses property classes such as A2-70 for common austenitic bolts. Quote the property class with the grade and do not assume a stainless bolt matches carbon steel strength. Your structural engineer must confirm the load capacity. Our standards page lists the DIN, ISO and BS codes we supply to.

One practical point on mixed metals: where stainless fasteners touch aluminium or galvanised steel in wet conditions, galvanic corrosion can affect the other metal. Isolating washers or sleeves are the usual remedy and should be planned in the design.

How do I order for a construction project?

  1. Prepare a bill of quantities with grade, standard, diameter, length and quantity.
  2. Note where each item is used, so exposure can be checked.
  3. Request a material test certificate if the specification demands it.
  4. Send the schedule through our enquiry form and receive price and lead time in the quotation.

Our construction industry page lists typical uses, and our Delhi NCR page explains how we serve the region.

What installation habits make stainless fasteners last longer?

Good fasteners can still fail early if they are installed badly. Stainless steel threads can gall, which means the surfaces seize and tear when tightened quickly or dry. Use a suitable anti-seize or lubricant on threads, tighten at a moderate speed, and avoid power tools running at full speed on long runs. Use washers under the head and nut to spread load and protect the mating surface.

Keep stainless fasteners clear of carbon steel dust and grinding sparks on site, because embedded iron particles rust and leave stains that look like the stainless itself is corroding. If cutting or grinding happens near installed fixings, clean the surfaces afterwards. A little care during installation protects the finish for years and keeps the facade or plant room looking as intended.

If you are unsure which items go where, send the drawings or a marked-up schedule and our team will review the grade choice for each location before quoting. This is especially useful on mixed projects where indoor plant rooms, rooftop equipment and facade work all sit under one package.

Frequently asked questions

Can SS 304 bolts rust outdoors?

SS 304 resists rust well in normal outdoor air, but it can show surface staining or pitting near chlorides, in heavy pollution or in poorly drained joints. SS 316 is the safer choice in those conditions.

Do you supply long studs and threaded rod?

Yes, studs in 1000 mm lengths (other lengths made to order), made to your thread and grade requirement.

Can you supply to a drawing for a facade system?

Yes. We make to drawing or sample, and we confirm feasibility, price and lead time in the quotation.

Ready to move ahead? Send your drawing, sample or size list and request a quote. You can also call +91 89196 74214 or write to ayrssnutbolt@gmail.com, and our team will reply with price and lead time in the quotation.

Need stainless steel fasteners like these?

Send your grade, size, quantity and standard. We reply with a quotation and confirm availability, standards and documents before you order.

Share this article

Keep Reading

Related Articles