Short answer: Ludhiana’s auto-component, hand-tool, machinery and cycle-parts makers mostly buy small stainless bolts, nuts, screws and washers in repeat batches. Use standard sizes wherever your design allows, and reserve special sizes for the few parts that truly need them. That keeps repeat purchasing simple and consistent.
What do Ludhiana manufacturers usually need in stainless?
Ludhiana is known for a dense base of component makers: auto and two-wheeler parts, bicycle and cycle components, hand tools, sewing and industrial machinery, and general engineering. Most of this work uses carbon steel, but stainless fasteners appear where corrosion, appearance or washdown matter. Examples include cycle-part fittings, tool fixtures, machine guards and covers, export-facing products, and assemblies exposed to moisture or coolant.
The buying pattern is typically many small fasteners ordered again and again. Our Ludhiana supply page describes how we work with buyers in the city.
Which grade should I choose: 304, 316 or 202?
SS 304 is the dependable all-round choice for products used outdoors, handled often or washed. SS 316 suits coastal, chemical or food-contact use, and is worth specifying for export products going to harsh environments. SS 202 offers a lower-cost option for light indoor duty, but it has weaker corrosion resistance than 304, so avoid it where parts get wet or salty.
A word on strength: standard austenitic stainless fasteners are generally lower in strength than hardened carbon-steel ones. If a load-bearing joint on a vehicle or machine is involved, confirm the required property class with your design team before changing material.
When should I stay with standard sizes and when go special?
| Situation | Better choice |
|---|---|
| Common bolt, nut and washer sizes | Standard to DIN, ISO or BS |
| Non-standard length or thread | Special, made to drawing |
| Unusual head shape or drilled feature | Special, made to drawing |
| Repeat product with a fixed design | Standard where possible; special only if necessary |
Standard sizes are easier to source again, compare and substitute. Special parts cost more effort to set up and to check, so ask whether a small design change could let you use a standard item. When a special part is the right answer, our custom fasteners service handles it from your drawing.
How do I set up bulk repeat supply?
Our bulk OEM supply service is built around repeat requirements. To make repeat buying smooth:
- Fix a part list with sizes, grade, standard and finish for each item.
- Group similar items into one enquiry, for example hex bolts, hex nuts and washers of matching size.
- Share a forecast of your regular requirement, so supply can be planned around it.
- Agree packing needs early, such as bags, cartons or export packing.
- Ask for a material test certificate when your customer demands it.
Browse the complete product range to build your part list.
How can I keep quality consistent across batches?
Consistency comes from clear acceptance rules. Agree what is checked, such as thread fit, length, head size, marking and finish, and keep a sample from an approved batch. For material confirmation, the test certificate shows grade and composition. Read about our checks on the quality page.
What should I tell my supplier about each part?
A clear enquiry avoids back-and-forth and wrong quotes, especially when you manage many part numbers. For each fastener, give your supplier the same short block of information.
- Item type: bolt, nut, screw, washer or stud.
- Size and thread, for example M8 x 1.25, and length where relevant.
- Grade: SS 304, 316 or 202, and the reason you chose it.
- Standard or drawing reference.
- Finish and marking requirements, if any.
- Expected regular requirement and the packing style you prefer.
If you are converting an existing carbon-steel part to stainless, say so. Thread tolerances, head sizes and grip lengths may need a quick check, and stainless is more prone to galling, so assembly lines may need a lubricant or lower tightening speed.
Frequently asked questions
Should I use stainless for every fastener on my product?
Not necessarily. Use stainless where corrosion, appearance or washdown justify it, and check strength needs on load-bearing joints.
Can you supply both standard and special sizes?
Yes. We supply standard parts to DIN, ISO and BS, and make special parts to your drawing.
Do you work with inch sizes?
Yes, both metric and inch sizes are available.
Can I order different items together?
Yes. Bolts, nuts, washers, screws and studs can be quoted together in one enquiry.
Send us your drawing, grade and quantity details and we will respond with a proper offer. You can request a quote, call +91 89196 74214 or email ayrssnutbolt@gmail.com.



