Worldwide shipping · SS 304 / 316 / 202

Import Stainless Steel Fasteners from India to Canada

Container ship at an international port for worldwide fastener export

Short answer: Canadian buyers can import stainless steel fasteners from India in both metric and inch (UNC/UNF) sizes, referenced to ASTM, ISO, DIN and BS standards. State the standard, grade and thread system on every line of your order, and choose SS 316 wherever parts will see de-icing salt or marine air. Ask for the documents you need at enquiry stage so they are arranged with the shipment.

Why do Canadian orders often mix metric and inch fasteners?

Canada works across both systems. Industrial equipment, imported machinery and much of the electrical and process sector use metric sizes, while construction, steel erection and older plant drawings frequently call for inch sizes with UNC (coarse) and UNF (fine) threads. A single project can need both, so a distributor or contractor often ends up buying M12 bolts and 1/2 inch bolts in the same order.

The risk is confusion. A 1/2-13 UNC bolt and an M12 bolt are close in diameter but are not interchangeable. Write the thread designation in full on every line, for example M10 x 1.5 or 3/8-16 UNC, along with length, head type and grade. We supply SS 304, 316 and 202 nuts, bolts, washers, screws and studs in metric and inch sizes, and you can see the full product range for what is available.

Which standards should I quote: ASTM, ISO or DIN?

Quote the standard your drawing, specification or customer calls for. Our dimensional references cover DIN, ISO, BS and ASTM, listed on the standards page. As a general guide:

  • Metric parts: ISO or DIN dimensional standards, with the ISO 3506 system for stainless property classes such as A2-70 and A4-80.
  • Inch bolts, screws and nuts: ASTM stainless references are commonly used, such as ASTM F593 for bolts and screws and ASTM F594 for nuts.
  • Studs and nuts for flanged joints: ASTM A193 and A194 grades are widely specified; confirm the exact grade and class your project requires.

If your engineer has specified a standard we have not listed, send it with the enquiry and we will confirm what can be supplied. Never assume that two standards are interchangeable without checking dimensions and mechanical requirements.

Is 316 necessary for cold climates and de-icing salt?

Cold itself is rarely the problem for austenitic stainless steel, which keeps its toughness at low temperatures. The issue is chlorides. Road salt and de-icing chemicals splash onto bridges, parking structures, rail and street furniture, and chlorides attack the protective film on stainless steel, causing pitting and crevice corrosion, especially where salt can sit in joints.

ExposureUsual choice
Indoor, dry, heated buildingsSS 304
Outdoor, de-icing salt, coastal air, wash-down areasSS 316
Dry, non-critical covers and guardsSS 202 may be considered

316 contains molybdenum and resists chlorides better than 304, but it is not immune. Good design still matters: avoid trapped crevices, rinse where practical, and apply anti-seize at assembly because stainless threads can gall in the cold and under heavy tightening.

What documents do I need for a Canadian import?

We provide a commercial invoice and packing list with each shipment, a certificate of origin when required, and a material test certificate on request. If your construction or industrial client demands material traceability by heat or batch, say so in the enquiry. Fasteners fall under HS heading 7318, but please confirm classification, duties and any regulatory requirements with your customs broker, as we do not advise on them.

Our approach to checking dimensions and material is outlined on the quality page.

How are the goods packed and shipped to Canada?

Export packing is in cartons, on pallets or in crates, with each pack marked with size, grade and quantity. For mixed metric and inch orders, ask for separate cartons per thread system so your warehouse can sort lots at receiving. We can quote EXW, FOB, CFR, CIF or DDP, depending on how much of the freight you want to manage. See export packing and shipping, the export overview and our Canada page for more detail.

How should I prepare the first enquiry?

A clean enquiry gets an accurate quotation the first time. Send a list with one line per item: product, thread designation, length, standard, grade, finish and quantity. Mark which items are metric and which are inch. For projects, add whether certificates are needed and which Incoterm you prefer. For new or made-to-order parts, a sample lot lets your team check thread fit and marking before you commit to a larger volume.

Frequently asked questions

Can you supply UNC and UNF threads?

Yes. State the size, threads per inch and thread series, for example 1/2-13 UNC or 1/2-20 UNF, so there is no ambiguity.

Should all outdoor Canadian fasteners be 316?

Where de-icing salt or coastal air is present, 316 is the safer choice. For dry indoor use, 304 is often sufficient. Choose by exposure and your own design rules.

Can I order metric and inch items together?

Yes, as one consolidated order. List each thread system clearly and we will quote them together.

Can you make parts to drawing?

Yes. Send the drawing with dimensions, grade and tolerances for a quotation.

Ready to move ahead? Please send your requirement for a quotation with sizes, grade and quantity, or call +91 89196 74214 or email ayrssnutbolt@gmail.com.

Need stainless steel fasteners like these?

Send your grade, size, quantity and standard. We reply with a quotation and confirm availability, standards and documents before you order.

Share this article

Keep Reading

Related Articles