Worldwide shipping · SS 304 / 316 / 202

Stainless Steel Fasteners from India to the Netherlands

Quality inspection of stainless steel fasteners with thread gauge

Short answer: Dutch distributors and machine builders can source stainless steel fasteners from India by specifying metric sizes to DIN, ISO or EN ISO numbers, the A2 or A4 steel group with its property class, and the documents their quality system needs. We recommend a sample lot for new part numbers so dimensions and head marking are checked before a full order.

Which standards do Dutch buyers expect?

The Netherlands is a fully metric market, and drawings usually reference EN ISO numbers, with DIN still common in older documents and distributor catalogues. The same part may carry both names, so always quote the number that appears on your drawing. Typical examples are hex bolts to DIN 933 or EN ISO 4017, hex nuts to DIN 934 or ISO 4032, socket head cap screws to DIN 912 or ISO 4762, and flat washers to DIN 125 or ISO 7089.

We work to DIN, ISO, BS and ASTM references. The standards page lists what we cover. Do not treat DIN and ISO numbers as always identical; some pairs differ in head size or across-flats dimensions, so confirm which one your assembly requires.

How do A2 and A4 marking work on stainless fasteners?

The ISO 3506 system describes stainless bolts, screws and nuts with a steel group and a property class:

  • A2 is the 304 type of austenitic stainless steel, suited to general indoor and mild outdoor use.
  • A4 is the 316 type, which contains molybdenum and resists chlorides and many chemicals better.
  • 70 or 80 after the group is the property class, indicating roughly 700 or 800 MPa tensile strength. Class 80 is not available on every product form or size.

So A2-70 is a standard choice for general machinery, and A4-70 or A4-80 is used where corrosion resistance matters more. Marking on the head normally shows the grade and class along with a manufacturer mark where the size allows. Distributors who resell to many customers should confirm marking requirements at enquiry stage. Our grade pages cover SS 304 and SS 316 in more detail.

Which grade suits marine and process applications?

Dutch ports, shipyards, offshore suppliers and process plants expose fasteners to salt air, seawater splash and cleaning chemicals. In these conditions A4 (316) is the usual starting point because 304 is more prone to pitting and crevice corrosion in chloride conditions. Even 316 is not immune, especially in stagnant seawater or tight crevices, so the final choice should follow the medium, temperature and your own design rules.

For machine builders, the question is often about washdown and food or chemical contact. A4 is commonly specified there as well. Where the mating parts are a different stainless grade or aluminium, consider galvanic effects and use suitable washers or insulating measures. Stainless on stainless threads can gall, so an anti-seize or lubricant at assembly is good practice.

What suits distributors and machine builders when ordering?

Distributors usually want many sizes in modest quantities, packed so lots stay separate in the warehouse. Machine builders want fewer part numbers but repeat consistency and sometimes made-to-order parts. We supply SS 304, 316 and 202 nuts, bolts, washers, screws and studs, and can make non-standard parts to drawing. Send one line per item with standard number, size, length, grade and quantity, and we will quote the list as one consolidated shipment. The product range shows what we supply.

For documents, we provide a commercial invoice and packing list with each shipment, a certificate of origin when required, and a material test certificate on request. State if you need batch traceability. Fasteners fall under HS heading 7318, but please confirm classification and import requirements with your customs broker. Our checks are described on the quality page.

How is the order packed and shipped?

Export packing is in cartons, on pallets or in crates, each pack marked with size, grade and quantity. For distributors, ask for one size and grade per carton. We can quote EXW, FOB, CFR, CIF or DDP. See export packing and shipping, the export overview and the Netherlands page for more.

Frequently asked questions

Can you quote to either DIN or EN ISO numbers?

Yes. Please give the number on your drawing so we do not substitute a part with different dimensions.

Is A4 always required in marine use?

It is the usual choice in chloride exposure, but the decision depends on the environment and your design requirements. Splash zones and submerged use need particular care.

Can I order small quantities of many sizes?

Yes. Send a size list with grade and quantity per line and we will quote it as a mixed consignment.

Can you supply a test certificate?

A material test certificate can be supplied on request. Mention it with the enquiry so it is arranged with the batch.

Ready to move ahead? Please send your requirement for a quotation with sizes, grade and quantity, or call +91 89196 74214 or email ayrssnutbolt@gmail.com.

Need stainless steel fasteners like these?

Send your grade, size, quantity and standard. We reply with a quotation and confirm availability, standards and documents before you order.

Share this article

Keep Reading

Related Articles