Worldwide shipping · SS 304 / 316 / 202

Stainless Steel Fasteners from India to Mexico: Inch and Metric

Warehouse with boxed stainless steel fasteners ready for export

Short answer: Mexican buyers often need both inch-series fasteners (UNC/UNF threads, ASTM or ASME references) and metric ones, so the key is to state the series, thread and standard on every line of the enquiry. Ayr SS Nut Bolt supplies stainless steel nuts, bolts, washers, screws and studs in both systems, made to drawing where needed.

Why does Mexico need both inch and metric?

Mexican industry sits next to the US supply chain, so inch-based drawings and equipment are common, while plants that follow European or Asian designs use metric. A single factory may hold both. This is where errors creep in: a metric M10 and a 3/8 inch bolt are close in size but not interchangeable, and a mismatched nut can jam or strip. We supply metric and inch fasteners and can quote either or a mixed list.

How do I specify inch fasteners correctly?

For inch sizes give the full designation as it appears on the drawing, for example diameter, threads per inch, length, head type and thread series. The two common thread series are:

  • UNC (coarse): the usual general-purpose series.
  • UNF (fine): used where finer adjustment or higher load in a given size is wanted.

Standards often named for inch stainless fasteners include ASTM F593 for bolts and screws and ASTM F594 for nuts, along with ASME dimensional standards such as B18.2.1 for hex bolts and B18.2.2 for nuts. Confirm which reference your drawing or purchase order requires and send it with the enquiry. Our standards page lists the references we work to.

How do I specify metric fasteners?

Give the diameter, pitch (coarse unless stated), length, head type, and the standard, such as DIN 933 or ISO 4017 for hex bolts, DIN 934 or ISO 4032 for nuts, DIN 912 or ISO 4762 for socket head cap screws. For stainless, add the property class such as A2-70 (304 type) or A4-80 (316 type), or simply state SS 304 or SS 316. See the SS 304 and SS 316 pages for how the grades differ. 316 offers better resistance to chlorides, which matters for coastal sites and washdown or chemical environments.

Can you support manufacturing and automotive supply chains?

Manufacturers and automotive suppliers usually want repeatable parts, consistent marking and traceable paperwork. We make fasteners to drawing, supply a material test certificate on request, and can keep the drawing number and grade on each order so repeats match. If your customer or plant has its own quality requirements, share them early so we can confirm what documents to provide. Our approach to checks is described on the quality page. Start with a sample or trial lot for any new part.

What documents and packing apply for Mexico?

We provide a commercial invoice, packing list, certificate of origin when required, and material test certificate on request. Packing is in cartons, pallets or crates, marked with size, grade and quantity, which also makes it easier to separate inch and metric lots at your receiving dock. We can quote EXW, FOB, CFR, CIF or DDP. HS heading 7318 covers these goods, but customs classification and import requirements should be confirmed with your customs broker. See export packing and shipping, the export page and our Mexico page.

What about thread fit, galling and assembly?

Stainless steel threads can seize or gall when tightened dry, particularly in nut-and-bolt pairs of the same grade. Using a suitable lubricant or anti-seize compound and avoiding high-speed power tools usually helps. Check torque values against the fastener grade and size rather than reusing figures meant for carbon steel, because stainless fasteners behave differently under load. If a joint is critical, confirm the torque and preload with your design engineer.

Also check that nut and bolt come from the same standard and thread series. Mixing an ASTM inch nut with a metric bolt, or two different thread classes, is a frequent cause of rejected assemblies at inspection.

If your plant runs both systems, it also helps to keep separate part numbers for inch and metric items and to print the series on the packing label. This small step cuts picking errors on the shop floor and makes cycle counts easier.

Frequently asked questions

Can I order inch and metric in one shipment?

Yes. List each line with its series, size, grade and quantity, and we will pack inch and metric lots separately and label them clearly.

Are UNC and metric coarse threads interchangeable?

No. Sizes may look close but the thread forms differ, so mixing them damages threads. Always match series between bolt and nut.

Do you make custom stainless parts?

Yes, to your drawing or sample. Include thread, length, grade and any standard to follow.

Which grade should I choose?

304 suits general use; 316 is preferred for chlorides, coastal air and many chemicals. Follow your drawing where a grade is specified.

Ready to move ahead? Please send your requirement for a quotation with sizes, grade and quantity, or call +91 89196 74214 or email ayrssnutbolt@gmail.com.

Need stainless steel fasteners like these?

Send your grade, size, quantity and standard. We reply with a quotation and confirm availability, standards and documents before you order.

Share this article

Keep Reading

Related Articles