Short answer: Buyers in Nigeria can import stainless steel fasteners from India by sea freight if the order is specified clearly, packed robustly and supported by the right documents. For oil and gas, construction and project work we suggest starting with a trial order to check size, grade and packing before placing larger lots.
What do Nigerian project buyers usually need?
Demand in Nigeria comes mainly from oil and gas support work, construction, industrial maintenance and contractors supplying project sites. These buyers often need a wide mix of sizes in one order: hex bolts, nuts, washers, threaded studs and socket screws, sometimes with long lead items such as studs cut to length. We supply SS 304, 316 and 202 in metric and inch sizes, with references to DIN, ISO, BS and ASTM. See the product range and our Nigeria supply page.
Which grade should I choose for Nigerian conditions?
Coastal and humid locations, and oil and gas facilities near the sea, expose fasteners to chlorides and moisture. As a general guide:
- SS 316 is usually preferred near the coast, offshore-support yards, and in chemical or process areas, because molybdenum improves chloride resistance.
- SS 304 suits general inland, indoor and less aggressive outdoor use.
- SS 202 is better kept to dry, non-critical applications.
Neither grade is immune to corrosion in every condition. Where a project specification names a grade or standard, follow that, and tell us the reference when you enquire.
How should the shipment be packed for sea freight?
Sea freight means repeated handling, stacking and humidity. Fasteners should therefore travel in strong cartons, on pallets or in crates, with each pack marked with size, grade and quantity. Clear labelling helps your clearing agent and site store identify lots quickly and reduces mix-ups between 304 and 316, which look alike. Heavier or longer items can go in crates. Our export packing and shipping page explains the options, and the export page gives an overview. Tell us if you need specific shipping marks or a particular packing list layout.
What documents will I need?
We provide a commercial invoice and packing list with each shipment, a certificate of origin when required, and a material test certificate on request. For projects that need traceability to a heat or batch, ask for the material test certificate when ordering. We can quote EXW, FOB, CFR, CIF or DDP so you can choose how much of the freight and handling we arrange. Import rules and clearance requirements should be confirmed with your customs broker or clearing agent before shipment. The relevant HS heading for these goods is 7318.
Why place a trial order first?
A trial order reduces risk for a first import. It lets you confirm the dimensions and thread fit, check that grade marking and packing arrive in good condition, and test how your documents and clearance process work, before committing to a project quantity. Many buyers use it to compare against their drawing or bill of quantities. Review the standards we work to and our quality approach so you know what to check on arrival.
How do I reduce the risk of mix-ups and damage on site?
On project sites the most common problems are mixed grades, wrong lengths and damaged threads. A few habits help. Order by item list with a clear code for each size and grade, and ask that the same code is printed on the carton. Keep 304 and 316 stock physically separate on site, and use the material test certificate to confirm grade when it is critical. Store cartons off the ground and away from standing water, even though stainless steel is corrosion resistant, because contamination from carbon steel dust or tools can leave rust marks on the surface.
For long threaded studs, handle them in the crate until needed so the threads are not bent or nicked during transit.
A last practical point is to keep a single contact person on each side for the order. Questions on sizes, grade or packing are then settled quickly, and the final packing list matches what your site store expects to receive.
Frequently asked questions
Can you supply a mixed list of sizes in one shipment?
Yes. Send the full list with grade, size and quantity per line, and we will quote it together and pack each size separately.
How do I tell 304 from 316 on arrival?
They look similar, so rely on marking and the material test certificate. Request one at order stage when grade confirmation matters.
Do you accept bills of quantities from contractors?
Yes, a bill of quantities or item list is a good starting point for a quotation.
Can you make special studs or long bolts?
Yes, parts can be made to your drawing. Send length, diameter, thread and grade.
Ready to move ahead? Please send your requirement for a quotation with sizes, grade and quantity, or call +91 89196 74214 or email ayrssnutbolt@gmail.com.



