Worldwide shipping · SS 304 / 316 / 202

Stainless Steel Fasteners from India to Italy for Machinery OEMs

Quality inspection of stainless steel fasteners with thread gauge

Short answer: Italian machinery builders and distributors can import stainless steel fasteners from India by specifying metric sizes to ISO or EN ISO (with DIN references where drawings still use them), the A2-70 or A4-80 property class, and the documents they need. We recommend a sample lot before the first full order so dimensions, marking and packing are checked on your side.

Which standards do Italian buyers expect?

Italian drawings are metric and usually reference EN ISO or DIN numbers. Many DIN parts now have ISO equivalents, so the same fastener may be called by either name. Common examples are hex bolts to DIN 933 or EN ISO 4017, hex nuts to DIN 934 or ISO 4032, socket head cap screws to DIN 912 or ISO 4762, and washers to DIN 125. We work to DIN, ISO and BS references and can quote against whichever number your drawing shows. Please quote the exact number and, where it matters, the revision. See our standards page for the references we cover.

What do A2-70 and A4-80 mean on a stainless fastener?

These come from the ISO 3506 system for stainless fasteners. The letter-number pair has two parts:

  • A2 or A4 describes the steel group. A2 is the 304 type of stainless; A4 is the 316 type, which contains molybdenum for better resistance to chlorides.
  • 70 or 80 is the property class, a tensile strength marking of roughly 700 or 800 MPa. Class 80 is generally available on bolts and screws, not on every product form or size.

So A2-70 is the common choice for general machinery, and A4-80 is used where higher strength and better corrosion resistance are both needed. Our SS 304 fasteners and SS 316 fasteners pages show how the grades compare. Marking on the head of bolts and screws normally shows the grade and property class together with the manufacturer mark where the size allows; confirm marking requirements when you enquire.

What documents should I request for Italy?

We provide a commercial invoice and packing list with each shipment, a certificate of origin when required, and a material test certificate on request. If your quality system needs a specific certificate format or batch traceability, say so in the enquiry so it is arranged at order stage. Importers should confirm customs and regulatory requirements with their customs broker. The goods fall under HS heading 7318 for screws, bolts and nuts, but the exact classification is for your broker to confirm.

Why start with a sample lot?

A sample lot lets your engineers measure thread fit, head dimensions, finish and marking before committing to a volume order. It is especially useful for a new part number, for A4-80 items, and for anything made to drawing. Agree in writing what you will check: thread gauge fit, length tolerance, marking legibility and packaging condition. Once approved, repeat orders can refer to the same drawing and sample. Read more about our checks on the quality page.

How is the order packed and shipped?

Export packing is in cartons, palletised or in crates, with each pack marked with size, grade and quantity. This helps your goods-in team and distributor warehouses sort lots quickly. We can quote EXW, FOB, CFR, CIF or DDP, depending on what suits you. Details are on our export packing and shipping page, and an overview of how we work is on the export page. Our Italy page has market-specific notes, and you can browse the product range for sizes.

How should I set up a long-term supply arrangement?

Once the sample lot is approved, most Italian buyers move to scheduled repeat orders against the same drawing or catalogue number. To keep this smooth, fix the specification in writing: standard number, grade and property class, finish, marking, packing method and the documents required with each shipment. Keep a retained sample from the approved lot to compare against later deliveries. If a distributor stocks the same item for several customers, agree one article description so that every order refers to identical wording.

Where you change a drawing revision, tell us before the next order so the change is applied and not carried over by mistake. This simple discipline prevents most disputes about dimensions and marking and keeps your machinery assembly lines running with consistent parts.

Frequently asked questions

Can you supply to DIN and ISO numbers interchangeably?

Yes, we quote to either reference, but please state the number on your drawing so we do not substitute a part with different dimensions.

Is A4-80 always better than A2-70?

Not always. A4-80 gives higher strength and chloride resistance, but A2-70 is sufficient for many indoor and general applications. Choose by load and environment.

Can distributors order mixed sizes?

Yes. Send a size list with grade and quantity per line, and we will quote it as one consolidated shipment.

Do you make non-standard parts?

Yes, parts can be made to your drawing. Send the drawing with tolerances and grade.

Ready to move ahead? Please send your requirement for a quotation with sizes, grade and quantity, or call +91 89196 74214 or email ayrssnutbolt@gmail.com.

Need stainless steel fasteners like these?

Send your grade, size, quantity and standard. We reply with a quotation and confirm availability, standards and documents before you order.

Share this article

Keep Reading

Related Articles