Worldwide shipping · SS 304 / 316 / 202

How to Order Custom Stainless Steel Fasteners to Drawing

Engineering blueprints

Short answer: To order custom stainless steel fasteners, send a drawing or a physical sample together with the grade, standard, quantity, finish and tolerances you need. We review it, make a sample for approval, and only then move to the full run. Most parts that can be turned, cold forged or hot forged can be made to drawing.

What do I need to send to get a quote on a made-to-drawing fastener?

The more complete your enquiry, the fewer back-and-forth emails. For a quote we need:

  • Drawing or sample: a dimensioned drawing (PDF or DWG) or a physical sample we can measure. If you only have a worn part, send it and tell us which dimensions are critical.
  • Grade: SS 304, SS 316 or SS 202. If you are not sure which suits the application, see our notes on SS 304 and SS 316.
  • Standard: the DIN, ISO or BS standard the part is based on, if any, and the ISO 3506 property class where it applies.
  • Quantity: the first order quantity and any expected repeat volume.
  • Finish: plain, polished, passivated or as machined, whatever your application needs.
  • Tolerances: only mark the tight ones that really matter. Over-specifying every dimension slows everything down.

What happens between my drawing and the first delivery?

  1. Drawing review. We check whether the geometry, grade and tolerances are practical to manufacture and may suggest small changes that make the part easier to produce without hurting its function.
  2. Quotation. Once the details are clear, we confirm the commercial terms with you.
  3. Sample. We make a sample piece to your drawing and send it for approval. This step protects both sides, so please do not skip it for a new part.
  4. Approval and production. After you sign off the sample, we start the full order and keep the approved piece as the reference.
  5. Inspection, packing and documents. Parts are checked, packed for domestic or export shipment, and a material test certificate is available on request.

What can and cannot be made to drawing?

We make nuts, bolts, studs, screws and washers in non-standard lengths, threads, head styles and special geometries. Small sizes are generally cold forged, and larger sizes are hot forged. Within our range, our listed bolts run to M24 and our studs to M36 in 1000 mm lengths, with larger sizes and other lengths made to orderetres in length, in metric and inch series.

Things that are usually not practical: parts that need a grade outside SS 304, SS 316 or SS 202, features that cannot be formed or threaded in stainless steel, or tolerances tighter than the process can hold. If your drawing has one of these, tell us early. We would rather propose an alternative than discover the problem after production.

Should I give a drawing or a sample?

A drawing is best because it removes guesswork. A sample is useful when the part is old, imported or has no documentation. If you send a sample, add a note on grade, thread pitch and what the part does, since a thread can look similar to another and a wrong pitch only shows up at assembly. Where possible, send both. For standard parts, the standard number and size are enough, and you may prefer to browse our product range first.

Where do custom parts fit with our other services?

Made-to-order work is covered on our custom fasteners page, and if the part will become a regular repeat item you can read about our wider services for scheduled supply. You can also see how we check material and dimensions on our quality page.

How can I make my drawing easier to quote?

A few habits make a big difference. State the thread standard and pitch clearly, mark the datum for length (under head or overall), and say whether a dimension is critical or only for reference. If the part is a variation of a standard fastener, say which one, for example a DIN 933 bolt with a longer plain shank. Add a note on what the part does and where it will be used. A fastener in a wet, salty or chemical environment needs a different decision on grade than one inside a dry enclosure, and we can only advise if we know the application. Finally, mention if the item will repeat. A part that will be reordered is worth setting up carefully, and an approved sample then becomes the standing reference for later batches.

Frequently asked questions

Can you copy a fastener if I only have a sample?

Yes. Send the sample with the grade you want and any critical dimensions. We measure it, confirm the details with you and produce a sample for approval before the full run.

Do I have to approve a sample for every order?

For a new part, yes, we recommend it. Once a part is approved and you reorder the same drawing, the approved piece is the reference and the step is usually not repeated.

Which stainless grade should I choose for a custom part?

SS 304 suits general indoor and mild outdoor use, SS 316 is the usual choice around chlorides, marine or chemical exposure, and SS 202 is a lower-cost option for less demanding conditions. If unsure, tell us the environment and we will advise.

Ready to move forward? Send us your details and request a quote, or call +91 89196 74214 or email ayrssnutbolt@gmail.com.

Need stainless steel fasteners like these?

Send your grade, size, quantity and standard. We reply with a quotation and confirm availability, standards and documents before you order.

Share this article

Keep Reading

Related Articles