Short answer: A DIN 934 hex nut for M10 has a width across flats of 17 mm and a height of 8 mm, and an M12 nut is 19 mm across flats and 10 mm high. The full M3 to M24 chart is below. If your drawing or purchase order says ISO 4032 instead, the M10 and M12 spanner sizes are different, so always state the standard.
What are the DIN 934 hex nut dimensions from M3 to M24?
The table gives the coarse pitch, the width across flats (s) and the nut height (m) for the most commonly ordered sizes. All values are in millimetres.
| Size | Coarse pitch | Width across flats, s | Nut height, m |
|---|---|---|---|
| M3 | 0.5 | 5.5 | 2.4 |
| M4 | 0.7 | 7 | 3.2 |
| M5 | 0.8 | 8 | 4 |
| M6 | 1 | 10 | 5 |
| M8 | 1.25 | 13 | 6.5 |
| M10 | 1.5 | 17 | 8 |
| M12 | 1.75 | 19 | 10 |
| M16 | 2 | 24 | 13 |
| M20 | 2.5 | 30 | 16 |
| M24 | 3 | 36 | 19 |
These are nominal catalogue values. Tolerances, thread class and property requirements come from the standard itself, so please check the current edition before you freeze a drawing. For the full specification we cover, see our DIN 934 standard page.
Why does ISO 4032 give a different spanner size for M10 and M12?
DIN 934 was the long-standing German standard for regular hexagon nuts. When the international ISO 4032 standard was introduced, a few sizes were given a smaller width across flats to match the wrench sizes used worldwide. The sizes affected are M10, M12 and M14.
- M10: 17 mm in DIN 934, 16 mm in ISO 4032
- M12: 19 mm in DIN 934, 18 mm in ISO 4032
- M14: 22 mm in DIN 934, 21 mm in ISO 4032
The other sizes in the chart above share the same width across flats in both standards, but the two standards are not identical in every respect, and the nut height can also differ. Please verify the figures against the current edition of the standard you are buying to.
Does it matter which standard I specify on the order?
Yes. A 17 mm spanner will still turn a 16 mm ISO nut, but the fit is loose and it can round the corners of the nut. In the other direction, a 16 mm spanner will not go onto a 17 mm DIN nut at all. On a machine with fixed tooling, a captive pocket or a guarded hexagon, the extra millimetre can decide whether the part fits.
When you place an order, write the standard next to the size, for example “M10 hex nut, DIN 934, SS 304” or “M10 hex nut, ISO 4032, SS 316”. If you are replacing nuts on an older machine, check which standard the original parts used rather than assuming.
If you are unsure which standard an existing nut follows, measure it across the flats with a calliper and compare it with the table and the ISO figures above.
How do I specify a stainless steel hex nut correctly?
- Size and thread: the metric size and, if it is not coarse, the pitch.
- Standard: DIN 934, ISO 4032 or another, written out in full.
- Grade: SS 304, SS 316 or SS 202. Our notes on SS 304 and SS 316 can help you choose, and you can also see the wider standards we work to.
- Mating bolt: if the nut will be used with a stainless bolt, match the grade, as covered on our hex bolts page.
- Documents: a material test certificate is available on request, so ask for it at the enquiry stage.
Browse our full range of SS hex nuts, or see everything we supply on the products page. We also make nuts to drawing if you need a non-standard height or thread.
Frequently asked questions
What is the width across flats of an M12 DIN 934 nut?
19 mm, with a nut height of 10 mm. An ISO 4032 M12 nut is 18 mm across flats, so state the standard when you order.
Is a DIN 934 nut the same as an ISO 4032 nut?
Not exactly. They are very close in purpose and many sizes share the same spanner size, but M10, M12 and M14 differ in width across flats, and other details can also differ between the two documents.
Which pitch does a DIN 934 nut use?
The chart shows the coarse pitch, which is the default for standard nuts. Fine-pitch nuts can be supplied on request if you specify the pitch, for example M12x1.5.
Can I get stainless nuts in the grade that matches my bolts?
Yes. We supply hex nuts in SS 304, SS 316 and SS 202, in metric and inch sizes, so you can keep nut and bolt in the same grade.
Need a specific size or standard? Send us your list and request a quote, or call +91 89196 74214 or email ayrssnutbolt@gmail.com.



