Worldwide shipping · SS 304 / 316 / 202

A dome nut, also called a cap nut, is a hex nut with a closed, domed end. The dome covers the exposed end of the bolt, which protects the threads from damage and corrosion and leaves a smooth, finished look. It also shields people from sharp bolt ends.
Our stainless steel dome nuts are made in SS 304 and SS 316, so they resist rust and staining in damp, outdoor and washed-down settings. As manufacturers and super-stockists in Ahmedabad, we supply them in a wide metric range.
SS 304 and SS 316
Metric
M3 to M24
From M4 (M3 confirmed on enquiry)
Hex nut with closed domed end
Confirmed on enquiry
Standards and drawings are confirmed on enquiry. Tell us the size, grade and thread you need and we will confirm what we can supply. For plain hex nuts in M2 to M36 and BSW 1/8 inch to 3/4 inch, see our hex nuts page.
Read our guide: Dome (cap) nuts: uses and sizes.
We supply SS 304 dome nuts in metric sizes from M3 to M24, and SS 316 dome nuts from M4. M3 in SS 316 is confirmed on enquiry.
They are the same product. Both names describe a nut with a closed domed end that covers the bolt thread.
The bolt end must fit inside the dome, so it should not protrude beyond the nut’s threaded depth. Check the nut’s overall height against your bolt length before ordering, and ask us if you need dimensions confirmed.
Finished, smooth ends on exposed bolts.
Neat, snag-free bolt ends on handrails and fixtures.
Covering sharp or exposed threaded ends.
SS 316 dome nuts where weather and salt are present.


