Worldwide shipping · SS 304 / 316 / 202

Home  /  Products  /  SS Flange Nuts

SS Flange Nuts

SS 304 · Metric M4 to M12 · Built-in washer face
Stainless steel hex nuts and nylock nuts
Stainless Steel Fasteners

SS Flange Nuts

A flange nut is a hex nut with a wide, integral washer face on one side. The flange spreads the clamping load over a larger area of the joint and, on many joints, removes the need for a separate washer. The bearing face also helps the nut resist loosening on a bolted joint.

Our stainless steel flange nuts are made in SS 304, so they resist rust and staining in damp, washed-down and outdoor settings. As manufacturers and super-stockists in Ahmedabad, we supply them in metric sizes from M4 to M12.

Specifications

SS Flange Nuts at a Glance

Sizes and ranges we regularly supply. Anything not listed here is confirmed on enquiry.

Grade

SS 304

Series

Metric

Diameter

M4 to M12

Design

Hex nut with integral flange

Other grades

Confirmed on enquiry

Special sizes

Confirmed on enquiry

Flange nuts are commonly made to DIN 6923. Tell us the size and the standard you need and we will confirm what we can supply. For plain hex nuts in M2 to M36 and BSW 1/8 inch to 3/4 inch, see our hex nuts page.

Read our guide: Flange nuts vs hex nuts.

Questions & Answers

Buying SS Flange Nuts? Quick Answers

Cannot find what you need? Send us your requirement and we will reply with a detailed quotation.

We supply SS 304 flange nuts in metric sizes from M4 to M12. Sizes outside this range are confirmed on enquiry.

The flange acts as a built-in washer face, so a separate washer is often not needed. If the mating surface is soft, slotted or oversized, check with your designer whether an additional washer is still required.

Our flange nuts are listed in SS 304. If your application involves salt, chlorides or chemicals, ask us whether another grade can be arranged for your size.

Applications

Where SS Flange Nuts Are Used

Machinery & Equipment

Frames and housings where the load is spread over a wider bearing face.

Vibration-Prone Joints

Assemblies where the bearing face helps the nut stay tight.

Food & Dairy Equipment

Rust-resistant fixings for washed-down machinery.

Outdoor Fittings

Brackets, panels and supports exposed to weather.

Quick Quote

Get a Quote for SS Flange Nuts

Tell us the size and quantity you need. We reply with price and shipping options for your country.
Accepted file types: pdf, jpg, jpeg, png, dwg, dxf, xls, xlsx, doc, docx, Max. file size: 10 MB.
More Products

You May Also Need

Stainless steel hex nuts and nylock nuts

SS Hex Nuts

Hex, nylock, dome, lock and flange nuts in SS 304, 316 and 202, to DIN and BS standards.
Stainless steel plain washers

SS Plain Washers

Plain flat washers M3 to M36 in SS 304 and SS 316 (and SS 202), plus made-to-size.
Stainless steel spring washers

SS Spring Washers

Flat and square section spring (split lock) washers in SS 304, 316 and 202.