Worldwide shipping · SS 304 / 316 / 202

Long-length bolts and screws are used where a fixing must pass through thick sections, stacked plates, spacers or deep housings. A longer shank also gives more thread engagement for adjustment and takes up greater gaps. Our range covers lengths from 110 mm to 200 mm.
We supply two styles: full-thread hex bolts for spanner or socket tightening, and Allen cap screws for a socket-key drive in tighter spaces. Both are made in stainless steel, so they resist rust and staining in damp, outdoor and washed-down settings.
SS 304 and SS 316
Full thread, M8 to M24
M8 to M20
110 mm to 200 mm
Listed for hex bolts
Confirmed on enquiry
Standards and drawings are confirmed on enquiry. Send the diameter, length and grade you need and we will confirm which length is available for each size.
Read our guide: Long-length bolts: when to use 110 to 200 mm.
Full-thread hex bolts are listed from M8 to M24 and Allen cap screws from M8 to M20, in lengths from 110 mm to 200 mm. Which lengths are available for each diameter is confirmed on enquiry.
Both styles are listed in SS 304 and SS 316. Hex bolts are also listed in SS 202. Choose SS 316 where chlorides or chemicals are present, and SS 202 only for dry, indoor, light-duty use.
Send us the size and length you need. We will confirm what we can supply, including shorter standard bolts and made-to-order lengths.
Fixings that must pass through stacked plates or deep flanges.
Through-bolting of frames, supports and housings.
Fixings in damp or chemical settings, in SS 316 where needed.
Joints with spacers, packing or large gaps.


