Worldwide shipping · SS 304 / 316 / 202
Home / Products / SS Square Nuts
SS 304 · Metric M5 to M12 · Four-sided square nuts

A square nut has four flat sides instead of six. The flat sides sit against a channel, slot or bracket wall so the nut cannot turn while the bolt is tightened, which speeds up assembly in slotted and channel fittings. It also gives a large bearing area against the joint.
Our stainless steel square nuts are made in SS 304, so they resist rust and staining in damp, washed-down and outdoor settings. Tell us the size, grade and standard you need and we will confirm availability.
SS 304
Metric
M5 to M12
Four-sided square nut
Confirmed on enquiry
Confirmed on enquiry
Square nuts are commonly made to DIN 557. Tell us the size and the standard you need and we will confirm what we can supply. For hex nuts in M2 to M36 and BSW 1/8 inch to 3/4 inch, see our hex nuts page.
We supply SS 304 square nuts in metric sizes from M5 to M12. Sizes outside this range are confirmed on enquiry.
Square nuts are used where the nut sits in a slot, channel or recess and must not rotate, for example in framing channels, brackets and some machinery guides. Where a spanner turns the nut, a hex nut is usually easier to fit.
Our square nuts are listed in SS 304. If your application involves salt, chlorides or chemicals, ask us whether another grade can be arranged for your size.
Fixings that sit in a slot so the nut cannot turn.
Holding hardware where part of the joint holds the nut still.
Guides, covers and fixtures that need a flat-sided nut.
Rust-resistant fixings for exposed supports and panels.


