Worldwide shipping · SS 304 / 316 / 202

Home  /  Products  /  SS Full-Threaded Studs (1000 mm)

SS Full-Threaded Studs (1000 mm)

SS 304 · SS 316 · SS 202 · 1000 mm lengths · Metric M4 to M36
Stainless steel studs and threaded rods
Stainless Steel Fasteners

SS Full-Threaded Studs (1000 mm)

A fully threaded stud is a rod threaded along its whole length. With a nut at each end it clamps parts together, and it can be cut to length on site or screwed into a tapped hole. The full thread means a nut can sit anywhere along the rod, which suits hangers, supports and flange work.

We supply fully threaded studs in 1000 mm lengths, in stainless steel SS 304, SS 316 and SS 202. They resist rust where plain steel rod would corrode. Each is supplied per piece and bundled by size. For our wider range of studs and threaded bar, see the studs page.

Specifications

SS Full-Threaded Studs (1000 mm) at a Glance

Sizes and ranges we regularly supply. Anything not listed here is confirmed on enquiry.

Grades

SS 304, SS 316 and SS 202

Metric diameter

M4 to M36

SS 316 range

From M6

Inch series

BSW sizes also listed

Length

1000 mm, fully threaded

Supply

Per piece, bundled by size

Common references include DIN 975 and DIN 976 for threaded rod and studs. Which standard applies is confirmed on enquiry; cut-to-length and custom lengths are also confirmed on enquiry.

Read our guide: Stainless steel studs: how to cut and use 1000 mm lengths.

Questions & Answers

Buying SS Full-Threaded Studs? Quick Answers

Cannot find what you need? Send us your requirement and we will reply with a detailed quotation.

Metric sizes run from M4 to M36 in SS 304, SS 316 and SS 202, with SS 316 available from M6. BSW sizes are also listed. Other combinations are confirmed on enquiry.

Our listed range is in 1000 mm lengths. Cut-to-length and custom lengths are confirmed on enquiry, so send us the diameter, length and quantity you need.

They are supplied per piece and bundled by size. Packing details for your order are confirmed in your quotation.

Applications

Where SS Full-Threaded Studs Are Used

Hangers & Supports

Suspended pipework, ducting and cable tray rods.

Flanges & Pressure Parts

Studs cut to length for flange joints in SS 316 or SS 304.

Anchoring & Fixing

Rod set into tapped holes or used with nuts at both ends.

Fabrication & Workshop

Stock rod cut to size for custom assemblies.

Quick Quote

Get a Quote for SS Full-Threaded Studs

Tell us the grade, diameter, length and quantity you need. We reply with price and shipping options for your country.
Accepted file types: pdf, jpg, jpeg, png, dwg, dxf, xls, xlsx, doc, docx, Max. file size: 10 MB.
More Products

You May Also Need

Stainless steel hex nuts and nylock nuts

SS Hex Nuts

Hex, nylock, dome, lock and flange nuts in SS 304, 316 and 202, to DIN and BS standards.
Stainless steel plain washers

SS Plain Washers

Plain flat washers M3 to M36 in SS 304 and SS 316 (and SS 202), plus made-to-size.
Stainless steel spring washers

SS Spring Washers

Flat and square section spring (split lock) washers in SS 304, 316 and 202.