Worldwide shipping · SS 304 / 316 / 202

A nylock nut is a lock nut with a nylon ring fitted in its top. The nylon insert grips the bolt thread as the nut is turned on, which creates friction that resists loosening from vibration. Nylock nuts are widely used where a joint must stay tight without a second nut or thread-locking compound.
Our stainless steel nylock nuts are made in SS 304 and SS 316, so the metal body resists rust and staining in damp and washed-down settings. As manufacturers and super-stockists in Ahmedabad, we supply both the tall and the thin type.
SS 304 and SS 316
M3 to M30
M6 to M16
Metric
Confirmed on enquiry
Confirmed on enquiry
Typical standards: DIN 982 (tall type, nylon insert) and DIN 985 (thin type, nylon insert). Tell us the size, grade and type you need and we will confirm what we can supply. For plain hex nuts in M2 to M36 and BSW 1/8 inch to 3/4 inch, see our hex nuts page.
Read our guide: Nylock nuts: DIN 982 vs DIN 985.
Both are nylon-insert lock nuts. DIN 982 is the tall type and DIN 985 is the thin type. We supply DIN 982 in metric M3 to M30 and DIN 985 in metric M6 to M16, both in SS 304 and SS 316.
The nylon insert limits the working temperature, not the stainless steel body. About 120 C continuous is the common figure, but check the insert’s temperature limit for your application. For hotter service, ask us about an all-metal lock nut instead.
Each time a nylock nut is removed, the nylon insert loses some grip. For critical joints, fit a new nut after removal and check that the nut still locks on the thread before reuse.
Joints that must stay tight under vibration.
Rust-resistant locking nuts for washed-down machinery.
SS 316 nylock nuts in damp and salty conditions.
Fixings that hold their tension without a second nut.


