Worldwide shipping · SS 304 / 316 / 202

Home  /  Products  /  SS Lock Nuts (Thin Nuts)

SS Lock Nuts (Thin Nuts)

SS 304 · SS 316 · Metric M5 to M36 · Thin jam nuts
Stainless steel hex nuts and nylock nuts
Stainless Steel Fasteners

SS Lock Nuts (Thin Nuts)

A lock nut, also called a thin nut or jam nut, is a low-profile hex nut. It is tightened against a standard nut on the same bolt or stud, and the two nuts working against each other lock the joint and resist loosening. Thin nuts are also used where there is too little space for a full-height nut.

Our stainless steel lock nuts are made in SS 304 and SS 316, so they resist rust and staining in damp, washed-down and corrosive settings. As manufacturers and super-stockists in Ahmedabad, we supply them in a wide metric range.

Specifications

SS Lock Nuts (Thin Nuts) at a Glance

Sizes and ranges we regularly supply. Anything not listed here is confirmed on enquiry.

Grades

SS 304 and SS 316

Series

Metric

Diameter

M5 to M36

Design

Thin hex nut (jam nut)

SS 316 sizes

Confirmed on enquiry

Special sizes

Confirmed on enquiry

Standards and drawings are confirmed on enquiry. Tell us the size, grade and thread you need and we will confirm what we can supply. For plain hex nuts in M2 to M36 and BSW 1/8 inch to 3/4 inch, see our hex nuts page.

Read our guide: Thin lock (jam) nuts explained.

Questions & Answers

Buying SS Lock Nuts? Quick Answers

Cannot find what you need? Send us your requirement and we will reply with a detailed quotation.

Fit the standard nut first and tighten it, then thread the thin nut on and tighten it firmly against the standard nut. The two nuts working against each other lock the joint and resist loosening.

We supply thin lock nuts in SS 304 and SS 316, in metric sizes from M5 to M36. SS 316 sizes are confirmed on enquiry, so mention the sizes you need in your message.

SS 304 suits general indoor and outdoor use and food equipment. Choose SS 316 when chlorides, salt spray or acids are present, for example marine, coastal and chemical installations.

Applications

Where SS Lock Nuts Are Used

Locking a Standard Nut

Jam-nut pairing on bolts, studs and threaded rod.

Tight Spaces

Joints with too little room for a full-height nut.

Machinery & Equipment

Adjusters, linkages and threaded fittings.

Marine & Chemical Use

SS 316 lock nuts where salt or chemicals are present.

Quick Quote

Get a Quote for SS Lock Nuts

Tell us the grade, size and quantity you need. We reply with price and shipping options for your country.
Accepted file types: pdf, jpg, jpeg, png, dwg, dxf, xls, xlsx, doc, docx, Max. file size: 10 MB.
More Products

You May Also Need

Stainless steel hex nuts and nylock nuts

SS Hex Nuts

Hex, nylock, dome, lock and flange nuts in SS 304, 316 and 202, to DIN and BS standards.
Stainless steel plain washers

SS Plain Washers

Plain flat washers M3 to M36 in SS 304 and SS 316 (and SS 202), plus made-to-size.
Stainless steel spring washers

SS Spring Washers

Flat and square section spring (split lock) washers in SS 304, 316 and 202.