Worldwide shipping · SS 304 / 316 / 202

DIN 934

DIN 934 Stainless Steel Hex Nuts

DIN 934 is the standard for regular hex nuts, and the current ISO equivalent is ISO 4032. We supply hex nuts in stainless steel to match bolts in SS 304, SS 316 and SS 202. Send size and grade for a quote.

Sizes and variants we supply

Grades and property classes

What DIN 934 covers

DIN 934 covers regular hex nuts, with a height of roughly 0.8 times the thread diameter and a hexagon sized by wrench width. It sets thread tolerances and dimensions for the nut body. It is a withdrawn standard, with ISO 4032 as its replacement, but the DIN number remains widely used when ordering nuts for stainless bolts and studs. Sending a drawing, sample or clear photo with your enquiry helps us match the part faster and avoids mistakes.

Typical applications

Equivalent standards and differences

ISO 4032 is the current equivalent of DIN 934. The two are very close, but wrench widths differ for some sizes, for example M10 and M12, so do not assume the spanner size is identical. If a drawing names DIN 934, tell us whether ISO 4032 is acceptable. Lock nuts and flange nuts are different standards, so state them separately.

How to specify DIN 934 on a purchase order

Write the standard, size, grade and quantity, for example: DIN 934 M10 A2-70 hex nut, 10,000 pieces. Add the finish, packing needs and destination country. If your drawing names ISO 4032, mention it. We confirm availability, the standard and which documents we can provide before you place an order. Sending a drawing, sample or clear photo with your enquiry helps us match the part faster and avoids mistakes.

Why source from Ayr SS Nut Bolt

Frequently asked questions: DIN 934 Stainless Steel Hex Nuts

A DIN 934 nut is a regular hex nut with metric coarse thread. It was replaced by ISO 4032, but the DIN number is still common when buying nuts. We supply it in stainless steel grades SS 304, SS 316 and SS 202, and confirm availability before an order.

The ISO equivalent of DIN 934 is ISO 4032. Dimensions are very close, but wrench widths differ for some sizes such as M10 and M12, so confirm the standard on your drawing. Tell us which one you need and we confirm what we can supply.

Use the same stainless group as the bolt, for example an A2 nut with an A2 bolt. Mixing A2 and A4 means the joint is only as corrosion resistant as the weaker part. Tell us the bolt grade and we match the nut grade for you.

Yes. DIN 934 nuts are the standard mating nut for DIN 933 and DIN 931 hex bolts of the same size and thread. Confirm the thread size and grade when you order, and we confirm availability and the documents we can provide.

Stainless on stainless can gall under fast tightening or dry threads. Use lubricant, tighten slowly, and consider different grades or hardness for mating parts. Ask us if you need guidance on your application, and read our galling guide in the blog.

Send the size, grade, quantity and destination to ayrssnutbolt@gmail.com or call +91 89196 74214. We confirm availability, the standard and the documents we can provide before an order is placed, and pack the goods for export by sea or air.

Request DIN 934 nuts

Send us the standard, grade, size and quantity. We confirm availability, the standard and the documents we can provide before you order.

Accepted file types: pdf, jpg, jpeg, png, dwg, dxf, xls, xlsx, doc, docx, Max. file size: 10 MB.