Choosing the right nut is as important as choosing the bolt. Here are the types of stainless steel nuts buyers ask for most, and what each one does best.
Hex nut (DIN 934)
The standard nut for general fastening. It works with bolts, studs and threaded rods and takes a normal spanner or socket.
Nylock nut (DIN 982, DIN 985)
A nut with a nylon insert that grips the thread and resists loosening from vibration. Typically suitable up to about 120 C. Ideal for machinery and vehicles.
Dome (cap) nut (DIN 1587)
Covers the end of a bolt for a safe, neat and corrosion-protected finish. Common in furniture, handrails and equipment guards.
Flange nut (DIN 6923)
Has an integral washer face that spreads load and removes the need for a separate washer. Good for soft materials and fast assembly.
Hex lock (thin) nut (DIN 439)
A thinner nut used as a jam nut to lock a standard nut in place or where space is limited.
Square, wing and weld nuts
- Square nuts: grip well in slots and channels.
- Wing nuts: tightened by hand with no tools.
- Weld nuts: welded to a part to give a ready threaded fixing point.
Match the nut to the bolt
Always match grade and thread series with the bolt. Using SS 316 bolts with SS 304 nuts reduces the corrosion resistance of the joint to the weaker part. See our full range of stainless steel nuts.

