Worldwide shipping · SS 304 / 316 / 202

Plain Washer vs Spring Washer: When to Use Each

Quality inspection of stainless steel fasteners with thread gauge

Washers look simple, but using the wrong one can damage a joint or let it loosen. Plain washers and spring washers do very different jobs.

What a plain washer does

A plain (flat) washer spreads the clamping load of a bolt head or nut over a larger area. It protects the surface from damage, bridges oversize holes and keeps the load even. As a rule its outer diameter is about twice its inner diameter.

What a spring washer does

A spring (split lock) washer is a coil with a gap. When tightened it flattens and pushes back, keeping tension on the bolt. This helps the joint resist loosening from vibration and thermal movement.

Use them together

On soft or painted surfaces, place a plain washer against the surface and a spring washer under the nut. The plain washer protects the material and the spring washer maintains tension.

Flat vs square section

Spring washers come in flat and square section. Square-section washers are heavier and grip harder, while flat-section washers suit lighter assemblies.

When a spring washer is not enough

For severe vibration or critical joints, use a nylock nut, a lock nut or a thread-locking design. Spring washers are an economical aid, not a guarantee.

We supply stainless plain washers and spring washers in SS 304, 316 and 202.

Share this article

Keep Reading

Related Articles