Worldwide shipping · SS 304 / 316 / 202

How to Prevent Galling and Seizing in Stainless Steel Fasteners

Engineer tightening a stainless steel bolt with a torque wrench

Galling, sometimes called thread seizing, is a common problem with stainless steel bolts and nuts. The threads weld together under pressure and friction and the nut can no longer turn. It is preventable.

Why stainless threads gall

Stainless steel forms a thin protective oxide film. Under high pressure and heat from friction, that film breaks down and the bare metal surfaces cold-weld. Similar austenitic grades in contact are the most prone to it.

How to prevent it

  • Lubricate the threads. Use an anti-seize compound or a suitable lubricant suited to the application and chemical environment.
  • Slow down. Power tools at high speed build heat. Tighten at lower speed.
  • Keep threads clean. Dirt and burrs increase friction.
  • Avoid over-tightening. Use the correct torque for the property class and lubrication.
  • Vary the materials where suitable. Pairing different grades or a different nut material can reduce the risk, provided corrosion needs are met.

Do not forget torque changes

Lubricating threads reduces friction, so the same torque produces more clamp load. Take that into account when you set torque values.

Choose quality fasteners

Well-formed threads with a clean finish gall less. Ask your supplier about thread class and finish when you order. See our technical data for more on grades and properties.

Share this article

Keep Reading

Related Articles